Connecting To Bluetooth - Numark CDMix Bluetooth Guia De Inicio Rapido

CONNECTING TO BLUETOOTH

1. Power on your Bluetooth device.
2. Power on CDMix Bluetooth.
3. Press the Pairing button on CDMIX Bluetooth to go into pairing mode to search for Bluetooth devices.
4. Go to your Bluetooth device's setup screen, find "CDMix" and connect. Pairing will be achieved once the
Bluetooth logo at the center of the Bluetooth Controls is illuminated.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
Note: If you experience trouble pairing or playing music, update your device's OS.
5. To disconnect pairing, press the Pairing button on CDMix Bluetooth.
6. To connect to another Bluetooth device, repeat steps 3-4.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
CUE POINTS
PLAY/PAUSE & CUE OPERATIONS
Press "PLAY/PAUSE"
to start music
To set a cue point:
1. Press the "PLAY/PAUSE" button to start the disc.
2. Press the "CUE" button to reset the disc to the last place where the disc was started (cue point).
EDITING CUE POINTS
To locate a new cue point, turn the inner dial while a cue point is selected. The CD player will repeatedly play small
parts of the CD as you move it to the desired position. To set a new cue point, press "PLAY/PAUSE" and then "CUE".
To locate a new cue point, pause the track near the place in the song you would like to set the cue point. Then turn
the jog wheel to the desired location that you want the cue point set (the CD player will repeatedly play small parts of
the track as you move it to the desired position). Press "CUE" to set the new cue point.
Adjust the "CUE" point
with the jog wheel
Press "PLAY/PAUSE" to start the music
Press "CUE" return to
last starting point
Play Interval
Back Cue Operation
Play Interval
Back Cue Operation
6
Position on Disc
Position on Disc