Proxxon MicroMot 60/E Manual De Instrucciones página 14

b)
c)
Never work without dust protec-
tion mask and safety glasses.
Some dusts have a hazardous effect! Materi-
als containing asbestos may not be machined!
For your safety, always wear
hearing protection while working!
Please do not dispo
off the machine!
Protective insulation safety class
system 2
1 pc. MICROMOT 60/E drill/grinder
1 pc. Power supply unit
1 pc. Storage case
1 pc. Operating instructions
1 pc. Safety guidelines
6 pcs. Collets (1.0-1.5-2.0-2.4-3.0 and 3.2
mm)
1 pc. Round grinding pin Ø 5mm
1 pc. Cylinder grinding pin Ø 6mm
1 pc. Cylinder grinding pin Ø 2.5 mm
1 pc. Cup grinding pin Ø 7mm
1 pc. Tungsten carbide micro drill Ø 0.5 mm
1 pc. Tungsten carbide micro drill Ø 1 mm
1 pc. Diamond-coated grinding pin Ø 1.8
mm
1 pc. Finishing miller, ball shaped Ø 2.3 mm
- 14 -
2 pcs. Sanding disc Ø 22mm (pink colour) of
high-grade corundum, for steel, cast
iron, HSS steels
2 pcs. Sanding disc Ø 22mm (grey), of silicon
carbide, fine, even grain size with con-
sistent hardness. For engraving and
frosting of glass, ceramic and stellites,
also for grinding of metal, white cast iron
and high-alloy steels
1 pc. Polishing disc for acrylic glass and
Plexi glas
1 pc. Brass brush for machining brass, brass
alloys, copper, precious metals, semi-
precious stones, plastic and wood. For
cleaning electronic components and
printed circuit boards.
20 pcs.Corundum cutting discs for cutting al-
loyed and non-alloyed steel, stainless
steels and non-ferrous metals. Can also
be used to cut wood and plastic.
1 pc. Clamping arbour shaft diameter Ø 3.2
mm
1. ON - OFF switch with speed control
2. Hook
3. Power cable
4. Locking pin
5. Spigot nut with steel clamping jaw
6. 20 mm fitting for mounting in drill stand
The PROXXON drilling and milling machine MI-
CROMOT 60/E is the ideal tool for precise
drilling, milling, grinding, polishing, brushing,
rust removal, engraving, chasing and cutting.
For hobby electronics, model making, precision
mechanics, jewellery shops, opticians, arts, tool
and mould making.
For marking tools and cameras.
It can be used on steel, non-ferrous metals,
glass, wood, minerals and ceramics.
The drill spindle is supported in a precision ball
bearing which eliminates any play.
Excellent handling because of the pen-type
grip.