Remote Control Functions - Molpir COMPACT 1.6 Manual Del Usuario

COMPACT 1.6
Remote control

Remote Control Functions:

1
Unit On/Off
Note: when this Key is pushed, the unit starts in
automatic mode
2
Centrifugal blower speed control
Note: while the unit is working in automatic mode
F4
if the user press this key,
F0
manual
key and the following symbols will appear on the display:
V5 V4 V3
, ,
3
Control de temperatura.
The comfort temperature is controlled by briefly pressing the
27 ºC - 59/80º F).
To release the remote control
To release the remote control; with the unit stopped, keep pushed the key
control panel. The symbol
stops blinking, push the On/Off key before 30 seconds and the unit will emit an acoustic
signal. In case this does not happen, this operation will need to be repeated from the
beginning.
How to deactivate remote control
In order to deactivate remote control, push key
display. Once it stops flashing, push key
seconds or else you will have to repeat the whole operation.
F4
This allows the user to choose the desired air flow bypushing this
V2 V1
, , .
C
will appear blinking in the display. When this symbol
the unit will change the working mode to
of control panel until
on panel. You will have to do it within 30
11
1
2
V1 V2 V3 V4
, , , ,
keys (15/
rom the
C
, flashes on
EN
3