Basic Functions - Philips AZ 3010 Guia De Inicio Rapido

LY

BASIC FUNCTIONS

Switching power on/off: Save energy
Whether you are using mains or battery supply, to
avoid unnecessary energy consumption always adjust
e
the source selector to off.
ng
General operation
in
1 To select your sound source adjust the source
selector to CD/TUNER/OFF.
2 Adjust the sound with the VOLUME and DBB
(Dynamic Bass Boost) controls.
3 To switch off the set, adjust the source selector to
off position.
e
Note: When the set is switched off the tuner presets
will be retained in the set's memory.
y
Tuner
Radio reception
1 Adjust the source selector to TUNER.
™ Display: shows tu briefly (See 2).
2 Press FM•MW once or more to select the desired
on
waveband.
™ Display: shows your waveband and the preset
number and the frequency of a preset station if
old
already programmed (See 3)
3 Press and hold down ∞ or § briefly to tune to a
radio station. Release when the frequency in the
display starts to change.
™ The radio automatically tunes to a radio station
of sufficient reception. Display shows Srch
e
during automatic tuning. (See 4)
ds
nd
All manuals and user guides at all-guides.com
– For FM, pull out the telescopic aerial. Incline and
– For MW (AM) the set is provided with a built-in
Programming radio stations
You can store up to a total of 32 radio stations in the
memory: 20 FM and 12 MW(AM).
1 Tune to your desired station (see Radio Reception).
2 Press PROG MODE to activate programming.
3 Press PRESET + or – once or more to allocate a
4 Press PROG MODE again to confirm the setting.
5 Repeat steps 1-4 to store other stations.
• You can erase a preset station by storing another
turn the aerial. Reduce its length if the signal is too
strong (very close to a transmitter).
aerial so the telescopic aerial is not needed. Direct
the aerial by turning the whole set.
™ Display: prog flashes. (See 5)
number from 1 to 20 for FM or 1 to 12 for MW(AM).
™ Display: prog disappears, the preset number
and the frequency of the preset station are
shown. (See 3)
frequency in its place.
TUNER