BALDR B0359WST2H2PR Manual Del Usuario página 16

TEMPERATURE
1. After power on ,the indoor temperature will display automatically,
it will update reading each 30 seconds and start to receive outdoor
signal which lasts for max 3 minutes.
2. Indoor temperature display range:-10°C~ 50.0°C(14°F~ 122°F);
for temperature lower than -10°C,the reading will be :"LL.L";
for temperature higher than +50°C,the reading will be :"HH.H".
3. Outdoor temperature display range :-40°C~60°C(-40°F~140°F);
for temperature lower than -40°C,the reading will be :"LL.L";
for temperature higher than +60°C,the reading will be :"HH.H".
4. Arrow indication for temperature changes:
will display when temperature changes less than 1°C
within one hour or compared with last reading.
will display when the reading increase by 1°C within one hour
or compared with last reading.
will display when the reading decrease by 1°C within one hour
or compared with last reading.
5. Accuracy: For temperature between 0°C~50°C,the accuracy is ± 1°C,
if out of this range the accuracy will be ± 2°C; Temperature resolution
is 0.1°C(0.1°F).
6. Press "SET " button to select the temperature unit °C/°F
(Refer to Manual Settings point 6).
TEMPERATURE ALERTS
Check and Turn ON/OFF Alerts
1. When in time display mode, press "ALERTS " button to check
temperature alerts .
2. Press and release the "ALERTS" button to check alerts by the order:
Outdoor High Temperature Alert→ Outdoor Low Temperature
Alert→ Indoor High Temperature Alert →Indoor Low
Temperature Alert→ Exit.
16