Cooper Lighting Solutions Halo home HIWAC1BLE40AWH Instrucciones De Instalación página 4

3-WAY INSTALLATION (2 Dimmers) Continued
10
At the location labeled "POWER" ,
connect the HALO Home Accessory
Dimmer (A) using provided wire
nuts (B).
i. Connect the tagged wire (Power) to the
Accessory Dimmer's black wire.
ii. Connect the bare copper or green
ground wire from the wall-box to
the Accessory Dimmer's green wire.
iii. Connect the other 2 dimmer wires
to the Accessory Dimmer's red wire.
iv. Connect the neutral wire in
the wall-box to the Accessory
Dimmer's white wire. (NEUTRAL IS
REQUIRED).
11
At the location labeled "LOAD"
connect the HALO Home Accessory
Dimmer using provided wire nuts.
v. Connect the tagged wire (lighting
load) to the Accessory Dimmer's red
wire.
vi. Connect the bare copper or green
ground wire from the wall-box to
the Accessory Dimmer's green wire.
vii. Connect the other 2 dimmer wires
(incoming power) to the Accessory
Dimmer's black wire.
viii. Connect the neutral wire in
the wall-box to the Accessory
Dimmer's white wire. (NEUTRAL IS
REQUIRED).
12
Using the screws provided (C), mount the Accessory Dimmer
in the wall-box and attach a wall plate (not included).
14
Using your smart phone/tablet, follow the online Quick Start Guide to pair this product to your HALO Home account.
support.BringHaloHome.com
Accessory
Hot Black
Green
Ground
Neutral
Power
Load
3-WAY WIRING DIAGRAM
Accessory
Dimmer
Switch
Red
White
13
Turn ON power at the circuit breaker. (An LED indicator
will start flashing when power is turned ON).
Traveler Wires
Black
Green
Ground
Accessory
Accessory
Dimmer
Switch
Red Load
White
Neutral
HALO Home
Smart Light(s)