10. Scope of Delivery
1 hotty LED Wax dipping unit
1 Operating Instructions
11. Accessories
GEO-Dip Dipping Wax (elastic):
No. 482-3000
GEO-Dip yellow, 200 g
No. 482-3200
GEO-Dip orange, 200 g
No. 482-3300
GEO-Dip green, 200 g
Rewax Dipping Wax (hard, non-elastic):
No. 651-0000
Rewax yellow, 210 g
12. Troubleshooting
Error
No display / no op‑
eration, although the
unit is switched on
the main switch (A).
The unit is operat‑
ing but there is no
increase in temper‑
ature.
Temperature has
been changed but is
not saved.
EN
Possible cause
• Power supply interrupted.
• Faulty overheat fuse.
• Faulty unit fuse.
• Faulty thermal sensor.
• Faulty heater.
• Mains supply interrupted be-
fore saving values (5 seconds
after changing values).
- 4 -
9. Technical data
Maximum power:
Minimum operating
temperature:
Maximum operating
temperature:
Power Supply:
Safety Appliances:
Fuse (not changeable)
rating:
230 V = T 500 mA / 250 V
100 - 120 V = T 250 mA / 250 V
Dimensions
(W x H x D):
Weight, approx.:
• Check the power supply
and power cords.
• Have fuse replaced by
Service Department.
• Have fuse replaced by
Service Department.
• Have probe replaced by
Service Department.
• Have heater repaired by
Service Department.
• Change again tempera-
ture and turn off unit only
after 5 seconds.
23 W (+/- 10 %)
60 °C [140 °F]
110 °C [230 °F]
230 V / 50 - 60 Hz
100 - 120 V / 50 - 60 Hz
90 x 65 x 98 mm
[3.54 x 2.56 x 3.86 inch]
400 g [14.1 oz]
Corrective action