Publicidad
12V ÷ 14.4V DC
53
52
FIG. 7
EXTERNAL SUPPLY
ALIMENTATION EXTERIEURE
EXT. ENERGIEVERSORGUNG
ALIMENTACION EXTERNA
ALIMENTAZIONE ESTERNA
VAL 130
FIG. 8
STORAGE CASE / RANGEMENT / LAGERUNG / ALMACENAMIENTO / CUSTODIA
19
23
22
VAL P19
43
2. APPLICATION RANGE
(Ref. to Figs. 2 and 4)
2.1)
The B131-UC is supplied with the AU130-C adaptor, which will accept semicircular
slotted dies (common to Cembre 130 kN tooling) suitable for:
– Indentation on copper conductors.
– Circular Compression on copper conductors.
– Hexagonal compression on copper, aldrey or aluminium conductors.
2.2)
With the upper adaptor AU130-... and lower adaptor AC130-P, the tool can accept:
– Pre-rounding dies UP130-...
(used for converting aluminium sectoral conductor to a compact, round section).
– Containing dies (MV, MVC, MVM, MUA series) and the relevant Indentors PS130-.../E
(to crimp connectors on aluminium cables using the deep indent crimping system).
3. INSTRUCTIONS FOR USE
(Ref. to Figs.1 and 9)
The tool can be easily carried using either the handle or the shoulder strap (11) attached
to the rings (15 and 18).
3.1) Preparation
– Insert the conductor in the connector.
– Position the connector between the dies and ensure the correct location of the crimp.
3.2) Die advancement
(Ref. to Fig. 1)
– Operate push-button (17) housed inside the pressure release button to activate the
motor-pump group for the advancement of the lower die.
– To halt the advancement, release the push-button (17) and the motor will cut out.
N
EVER PRESSURIZE THE HEAD WITHOUT INSERTING THE DIES
CAUSE DAMAGE TO THE HEAD AND THE RAM
Make sure the dies are exactly positioned on desired crimp point, otherwise re-
open
dies following instructions as per § 3.4 and position the connector again.
3.3) Compression
– By keeping push-button (17) pressed down the motor continues to operate: the ram (14)
will gradually move forward until the two dies touch.
– It is recommended to continue pumping until the motor stops automatically.
3.4) Release of dies
– By pressing the pressure release button (16), the ram (14) will retract and open the dies.
4
ENGLISH
,
AS THIS COULD
.
Publicidad
