Setting Up; Electrical Installation - Parker EO2 – FORM F3 Manual De Instrucciones

3.3 Setting up

•
Put the machine on the four wheels and tighten the parking brake, in order to ensure safe
conditions of the machine.
NOTE!
i
The machine may be operated only in closed and dry areas. The underground
should be even and horizontal.
Within a workshop the machine can be pushed on the wheels to the different
places of work.

3.4 Electrical installation

The machine is normally supplied with a 5m length of connection cable. A 3-phase and ground
connection is required. A 15 amp main fuse is recommended but no more than 20 amp. Attach the
machine with the electric plug to the electrical current supply (400 V, 50Hz).
NOTE!
i
Before power is applied, the voltage of the power supply should be checked
against the voltage specified of the machine (see identification plate or circuit
diagram).
Parking brake
- 27 -