Peavey Architectural Acoustics IP-Six Manual Del Usuario página 10

3
CAUTION
RISK OF ELECTRIC SHOCK
120VAC ~ 60Hz
DO NOT OPEN
550 Watts
AVIS:
RISQUE DE CHOC ÉLECTRIQUE-NE PAS OUVRIR
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, THIS APPARATUS SHOULD NOT BE
EXPOSED TO RAIN OR MOISTURE AND OBJECTS FILLED
WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE
PLACED ON THIS APPARATUS.
AVIS:
DANS LE BUT DE REDUIRE LES RISQUES
D'INCENDIE OU DE DECHARGE ELECTRIQUE, CET
APPREIL NE DOIT PAS ETRE EXPOSE A LA PLUIE OU A
L'HUMIDITE ET AUCUN OBJET REMPLI DE LIQUIDE, TEL
QU'UN VASE, NE DOIT ETRE POSE SUR CELUI-CI.
MOUNT IN RACK ONLY.
INSTALLER SUR SUPPORT DE MONTAGE SEULEMENT.
(1) Input Connector
Rear Panel
The IP™-Six has a plugable input connector and individual channel rotary attenuators. Gain/input
sensitivity is factory set for an overall gain of x40. Connections at the input connector permit the
audio signal ground to be connected or lifted from the chassis ground. See the sections on Input
Module Connections and Removing or Replacing a Module for more information.
(2) Output Barrier Strip
A barrier strip is provided for connection of loudspeakers with bare wire or spade-lug connectors.
(3) IEC Power Connector
A standard IEC power connector is located at the upper left corner of the amplifier back panel. An AC
mains cord with the appropriate AC plug for the intended operating voltage is included.
(4) Fan Grille
A continuously variable speed DC fan supplies cool air into the amplifier. Do not block this air intake!
The fan operates only when the amplifier heat sinks require cooling.
Outputs
RCHITECTURAL
400W/Ch. @ 2 Ohms
Ch B Ch A COUSTICS
TM
by
A Product of Peavey Electronics Corp.
711 A St.
Meridian, MS 39301
Designed & Built in the U.S.A.
2
10
4
Inputs
Level ( ) Balanced Line Level
Ch B Ch A
-80 0 -80 0
1
Ch B Ch A