Peavey Architectural Acoustics IP-Six Manual Del Usuario página 16

Rated Power 4 ohms bridge
Rated Power 8 ohms bridge/70 volts
Program Power 8 ohms bridge/70 volts
Rated Power 2 x 2 ohms
Rated Power 2 x 4 ohms
Rated Power 2 x 8 ohms
Rated Power 1 x 2 ohms
Rated Power 1 x 4 ohms
Rated Power 1 x 8 ohms
Minimum Load Impedance
Maximum RMS Voltage Swing
Frequency Response
Power Bandwidth
T.H.D. 2 x 2 ohms
T.H.D. 2 x 4 ohms
T.H.D. 2 x 8 ohms
SMPTE IMD
Slew Rate
Damping Factor (8 ohms)
Input CMRR
Voltage Gain
Input Sensitivity
IP -Six
™
SPECIFICATIONS
825 watts @ 1 kHz <0.025% THD
612 watts @ 1 kHz Sine Wave <0.025% THD
800 watts
400 watts per channel @ 1 kHz <0.025% THD both channels driven
300 watts per channel @ 1 kHz <0.02% THD both channels driven
180 watts per channel @ 1 kHz <0.02% THD both channels driven
500 watts @ 1 kHz at <0.02% THD
350 watts @ 1 kHz at <0.015% THD
200 watts @ 1 kHz at <0.006% THD
2 ohms
45 volts
10 Hz - 25 kHz; +0, -1 dB at 1 watt
10 Hz - 50 kHz; +0, -3 dB at rated 2 ohm power
< 0.10% @ 325 W per channel from 20 Hz to 20 kHz
< 0.10% @ 250 W per channel from 20 Hz to 20 kHz
< 0.10% @ 160 W per channel from 20 Hz to 20 kHz
< 0.1% 60 Hz and 7 kHz, 250 W @ 4 ohms
7V/us
> 400:1 @ 20 Hz - 400 Hz
> -97 dB @ 1 kHz
x 40 (32 dB)
0.728 V @ 2 ohms, 0.854 V @ 4 ohms, 0.952 V @ 8 ohms
16