Changing Beverage Settings Before And During Preparation - melitta VARIANZA CSP Manual De Instrucciones

6. You can execute the Easy Cleaning programme or prepare further bev-
erages.
a) Execute the Easy Cleaning programme. To do so, follow the instruc-
tions on the display. Information on this is available in section 9.4
Using the "Easy Cleaning" programme on page 87.
b) Prepare further beverages and execute the Easy Cleaning programme
later.
» The ready symbol appears on the display.
6.7 Changing beverage settings before and during
preparation
Beverage settings can be changed before and during beverage preparation.
Information
The following settings only apply to the current beverage preparation.
Changing beverage settings before preparation
The total beverage amount and the coffee strength can be changed before
selecting a beverage.
Before selecting a beverage, use the arrow buttons to set a beverage
ƒ
amount.
Before selecting a beverage, use the "Coffee strength" button to set the
ƒ
coffee strength.
Information
ū When preparing mixed beverages, the total beverage amount is sub-
divided according to a specified ratio. This applies to mixed beverages
made from coffee with milk or hot water.
ū If a beverage is not prepared within 1 minute, the appliance switches to
the default settings.
Preparing beverages
77