Cooau CU-SPC03 Manual Del Usuario página 24

1. Photo Resolution: 20M/16M/12M/8M/5M
Default setting is 20M.
2. White Balance: Auto/ Sunny / cloudy / Incandescent / Fluorescence
Default setting is Auto.
White Balance lets you adjust the color temperature cool or warm
lighting conditions. When you change this setting, the IPS display
immediately shows you the effect on your image.
3. Exposure Setting: -3 ~ +3
Default setting is 0.
By default, your camera uses the entire image to determine the
appropriate exposure level. However, EV lets you select an area that
you want the camera to prioritize when determining exposure. This
setting is particularly useful in shots where an important region might
be over- or underexposed.
When you change this setting, the IPS display immediately shows you
the effect on your image. If you change modes, the camera returns to
using the entire scene to determine the correct level of exposure.
4. Metering Mode: Average / Center / Spot / Matrix
Default setting is Average.
The metering mode refers to the way in which a camera determines
exposure. Cameras generally allow the user to select between average,
center, spot or matrix metering modes. The different metering modes
allow the user to select the most appropriate one for use in a variety
of lighting conditions.
20