TMC Aquarium AQUARAY Control Instrucciones De Funcionamiento página 3

Operating Instructions
Important Safety Information –
Input: 2 x 15.5-19.5V DC 0.7
Output: 2 x 15.5-19.5V DC 0.7 (0-100% PWM)
Caution: Do not use any power supply other
than the one supplied with your genuine
quaRay luminaire. The use of a different power
supply will invalidate the guarantee.
- lways isolate the PSU from the mains
electricity before installing or carrying
out any maintenance to your quaRay
Control unit.
Caution: The quaRay Control unit is not
waterproof and therefore must not be mounted
above the aquarium or in any position where it
may accidentally fall into water or be splashed by
water.
Caution: Do not operate this appliance if it has
been damaged, is malfunctioning, or has been
dropped or immersed in water.
- This unit is designed to be used indoors
and is not suitable for any outdoor
applications.
Caution: lways leave a drip-loop in the DC
supply cable to the quaRay lamp unit to prevent
water running down the cable and reaching the
quaRay Control unit.
- Dispose of this unit responsibly. Check
with your local authority for disposal
information.
Please read carefully
1