Important Safety Instructions - Craftsman 138.99078 Manual Del Operador

Ocultar thumbs Ver también para 138.99078:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INSTRUCTIONS

WARNING:
READ AND UNDERSTAND
ALL INSTRUCTIONS BEFORE USING THIS
APPLIANCE. Failure to follow all instructions
listed below may result in electric shock, fire,
and/or serious personal injury.
READ THESE INSTRUCTIONS BEFORE USING
THIS BLOWER
■ Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
■ To reduce the risk of electric shock, this tool has a
polarized plug (one blade is wider than the other)
and will require the use of a polarized extension
cord. The plug will fit into a polarized extension
cord only one way. If the plug does not fit fully into
the extension cord, reverse the plug. If the plug still
does not fit, obtain a correct polarized extension
cord. A polarized extension cord will require the
use of a polarized wall outlet. This plug will fit into
the polarized wall outlet only one way. If the plug
does not fit fully into the wall outlet, reverse the
plug. If the plug still does not fit, contact a qualified
electrician to install the proper wall outlet. Do
not change the equipment plug, extension cord
receptacle, or extension cord plug in any way.
■ Avoid body contact with grounded surfaces such
as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your
body is grounded.
■ Don't expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk
of electric shock.
■ Do not handle plug or tool with wet hands.
■ Use outdoor extension cords marked W-A, W, SW-
A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or
SJTOW-A. These cords are rated for outdoor use
and reduce the risk of electric shock.
■ Never allow children to operate the equipment.
Never allow adults to operate the equipment
without proper instruction.
■ Wear eye protection with side shields which are
marked to comply with ANSI Z87.1 as well as
hearing protection when operating this product.
■ Always use face or dust mask if operation is dusty.
■ Use extra care when cleaning on stairs.
■ Do not leave appliance plugged in. Unplug from
outlet when not in use and before servicing.
■ Do not expose to rain, store indoors.
All manuals and user guides at all-guides.com
■ Use only as described in this manual. Use only
■ Keep hair, loose clothing, fingers and all body parts
■ To reduce the risk of electric shock, this appliance
■ Wear heavy long pants, long sleeves, boots, and
■ Do not force tool. Use the correct tool for your
■ Do not operate the equipment while barefoot
■ Do not use on steps, a ladder, roof top, tree, or other
■ Secure long hair so it is above shoulder level to
■ Keep firm footing and balance. Do not overreach.
■ Turn off all controls before unplugging.
■ Do not allow to be used as a toy. Close attention is
■ Avoid accidental starting. Be sure the power switch
■ Do not use tool if switch does not turn it on or off.
■ Do not use with damaged plug. If tool is not working
■ Do not leave the tool when plugged in. Unplug from
■ Keep all bystanders, children, and pets at least 50
3 — English
manufacturer's recommended attachments.
away from openings and moving parts.
has a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change
the plug in any way.
gloves. Avoid loose garments or jewelry that could
get caught in moving parts of the machine or its
motor.
application. The correct tool will do the job better
and safer at the rate for which it is designed.
or when wearing sandals or similar lightweight
footwear. Wear protective footwear that will protect
your feet and improve your footing on slippery
surfaces.
unstable support. Stable footing on a solid surface
enables better control of the blower in unexpected
situations.
prevent entanglement in any moving parts.
Overreaching can result in loss of balance.
necessary when used by or near children.
is not on before plugging in. Turn switch off before
unplugging.
Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
as it should or has been dropped, damaged, left
outdoors, or dropped into water, return it to an
authorized service center.
the power outlet when not in use, before servicing,
and before storing the tool. Such preventative
safety measures reduce the risk of starting the tool
accidentally.
ft. away.

Publicidad

Tabla de contenido
loading

Tabla de contenido