Specific Safety Information; Fcc Statement; Video Scope Safety - Snap-On BK6500 Manual De Instrucciones

Specific Safety Information

Read this operator's manual carefully before using.
Failure to understand and follow the contents of this
manual may result in electrical shock, fire and/or
severe personal injury.

FCC Statement

This device complies with Part 15 of the FCC Rules.
Operation is subject to the fol lowing two conditions:
1. This device may not cause harmful inter ference.
2. This device must accept any interfer ence
received, including interference that may cause
undesired operation. NOTE! This equipment
has been tested and found to comply with
the limits for Class B digital devices, pursuant
to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential
installation. This equip ment generates uses
and can radiate radio frequency energy and, if
not in stalled and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that in terference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be de termined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the
equipment and receiver.
– Consult the dealer for help.
Use of shielded cable is required to comply with Class
B limits in Subpart B of Part 15 of the FCC rules.
Do not make any changes or modifications to the
equipment.
This device complies with Part 15 of the FCC Rules
and with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any
interference received, including interference that
may cause undesired operation. Note: Changes or
modification not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
6
Digital Video Scope
separation between
This Class B digital device complies with Canadian
ICES-003.

Video Scope Safety

• Do not place the tool into any thing or anywhere
that may contain a live electrical charge.
• FOR WALLS: For inspecting inside walls, be sure
to shut off the circuit breaker to the whole house
before using the tool behind any of the walls
• FOR PIPES: If you suspect a metal pipe could
contain an electrical charge, have a qualified
electrician check the pipe before using the
tool. Ground cir cuits, in some cases, can be
returned to cast iron pipes and cause them to
be charged.
• FOR AUTOMOBILES/HEAVY EQUIPMENT/
MOTORSPORTS: Be sure the auto mobile,
heavy equipment or motorsport equipment
is not running during inspection. Metal and
liquid under the hood may be hot. Do not get
oil or gas on the imager head. Exposure to
petroleum-based sub stances will eventually
degrade the im ager head covering.
• GENERAL USE: Do not use anywhere the
unit may come into exposure with haz ardous
chemicals, electrical charges or moving parts.
Such situations may result in serious injury
or death.
SAVE THESE INSTRUCTIONS!
the
Snap-on