Advanced Functions - Friedrich SS08 Manual De Instalación Y Operación

External Control Status
The icon illuminates to indicate that the system is being controlled
$MART
remotely from a source such as a smart grid.
79
AUTO FAN
79
AUTO FAN
The icon illuminates to indicate that the system is receiving a Wi-Fi
connection.

ADVANCED FUNCTIONS

Let me put in plain words many of your unit's advanced functions (Timer,
Schedule, Error Mode, Test Mode, and Maintenance Menu). The functions
mentioned in the following section may or may not be available depending
on the air conditioner model.
Timer/Schedule Select
79
AUTO FAN
The control system has three Timer/Schedule functions:
Timer (factory default) - Allows you to command the unit to turn
1.
ON and OFF at time you program within a 7 day window. Setting
the start, stop and day window can be found later in this manual.
Residential Schedule (Selection #1) - When selected the unit
2.
follows a preprogrammed set of operational parameters that
covers 7 days of the week with 4 time windows during each day.
Each time window has it's own set of 6 operating parameters.
Refer to Addendum 1.
All manuals and user guides at all-guides.com
F
SET POINT
$MART
FRR125
F
SET POINT
FRR126
F
SET POINT
FRR136
3. Commercial Schedule (Selection #2) - When selected the unit
follows a preprogrammed set of operational parameters that covers 7
days of the week with 2 time windows during each day. Each time window
has it's own set of 6 operating parameters. Refer to Addendum 1.
To change the selection, press and hold the TIMER/SCHEDULE
button for 3 sec.
If the Schedule function is available, the system displays the
icon. The display indicates the schedule function that is active.
SCHEDULE
To change to an alternate schedule (2 or 3), press the
If the Schedule function is not available, the Timer icon
the icon.
SCHEDULE
To save and exit this selection, press the TIMER SET button for 3
seconds (Figure 10).
If there is no button activity for 15 seconds, the function will time out and
leave the original selection. Once the selection is saved or timed out, the
display reverts to the normal display.
After pressing the or button, within 15 second of pressing the
button for 3 seconds, the display indicates a change to Timer/Scheduler
2. To save and exit this selection, press the TIMER SET button (Figure 10).
79
AUTO FAN
The display reverts to the normal display.
1
SCHEDULE
FRR137
c i n o
or button.
shows without
2
SCHEDULE
FRR138
F
SET POINT
FRR136
+
15