Components; Connecting And Disconnecting Filters; Putting On And Taking Off - cleanAIR Shigematsu GX02 Instrucciones De Uso

Instructions for use
Notified person for the CE approval:
Occupational Safety Research Institute, v.v.i.
Jeruzalémská 1283/9, 110 00 Prague 1, Czech
Republic
Authorised person 235
Notified person 1024
Declaration of Conformity is available at: https://
www.clean-air.cz/doc

3. Components

Table 1: Product name, size and product code
Product Size
name
S
GX02 M
L
S tructural drawing
• 
1.1)
Table 2: Parts list*
Pos Part name
Exhalation valve cover
1
and exhalation valve
Inhalation valve seat and
2
inhalation valve
Inner mask (with
inner valve and inner
3
valve seat)
4 Harness
Visor protection film
5
GX02
Spectacles kit for mask,
6 CoVidi SG1, for distance
lenses
Spectacles kit for mask,
7 CoVidi SG2, for reading
lenses
*1 Parts with product codes can be exchanged
by a competent person.
Product code
710600S
710600M
710600L
(see Figures Annex
Product code
- 710696
- 710695
S - 710690S
M - 710690M
L - 710690L
- 710680
- 710620
- 710675.1
- 710675.2
4. Connecting and disconnecti-
ng filters
• Connecting
(see Figures Annex 2.1)
Attach the threaded section of the filter or air
hose connector into an internal thread of the mask
and tighten it by screwing it in the clockwise
direction.
NOTICE
Be careful not to damage the thread or the seals;
perform the tightening with your hand only.
D isconnecting
• 
To remove turn the filter or air hose connector
in the counter-clockwise direction.

5. Putting on and taking off

Figures Annex 3.1 - 3.3)
Putting on

1. Loosen the strap by pushing the buckle axis
towards the mask and pulling the strap. (Fig.
3.1)
2. Hold the right and the left straps by both
hands. Insert your chin into the lower face
piece and drag the straps over your head.
(Fig. 3.2)
3. Align the mask with your face and gradually
and carefully tighten all straps from 1 to 6
(Fig. 3.3).
NOTICE
1. Make sure the mask is not misaligned on
your face.
2. Any hair caught inside the mask could
cause air-tightness disruption.
4. Pull the head straps downwards and bac-
kwards, to eliminate any free space in the
front section.
5. Push the eye window towards your head
and gradually firmly tighten all the straps
from 1 to 6.
GX02 Full-Face Mask
(see Figures Annex 2.2)
ENG
(see
5