Before You Begin; Charging Your Blender/Battery Life; Assembly - Cuisinart EvolutionX Instrucciones/Libro De Recetas

BEFORE YOU BEGIN

Before using the EvolutionX
Rechargeable Hand Blender for the first time,
we recommend that you wipe the unit with a
clean, damp cloth to remove any dirt or dust. Dry
it thoroughly with a soft, absorbent cloth. Handle
carefully.
NOTE: Blending shaft and whisk attachment are
NOT dishwasher safe, refer to cleaning
instructions on page 7.
Read all instructions completely for detailed
operating procedures. The batteries in your
EvolutionX Cordless Rechargeable Hand
™
Blender have not been fully charged. Before
the first use of this appliance, the batteries
must be charged until the 3 blue LED lights
are illuminated. See Charging Your Blender/
Battery Life, below.
CHARGING YOUR
BLENDER/BATTERY LIFE
The batteries in your EvolutionX™ Cordless
Rechargeable Hand Blender have not been fully
charged. Before the first use of this appliance,
the batteries must be charged until all 3 blue
battery indicator lights illuminate. With a full
charge, your hand blender will run for
approximately 20 minutes, depending on load.
Your hand blender will be fully charged in
approximately 2 hours (when charged at room
temperature below 30°C/86°F).
HOW TO READ
THE BATTERY LIFE INDICATOR
• When 1st light is flashing and others are off,
battery capacity <40%.
• When 1st light is solid and 2nd light
is flashing, battery capacity is 40%-70%.
• When 1st and 2nd lights are solid and 3rd light
is flashing, battery capacity is 70%-95%.
• When Battery Life Indicator/LED Light Bar dis-
plays 3 solid blue power lights, battery capac-
ity is 95%. (NOTE: 95% charged for a lithium
ion battery is considered fully charged.)
Cordless
™
QUICK-CHARGE FEATURE
Your Cordless Rechargeable Hand Blender is
equipped with a quick-charge feature. If your
power handle runs out of power, you can "quick
charge" your unit:
• Charge for 15 minutes to get 25 seconds
of runtime.
• Charge for 30 minutes to get 1 minute
and 45 seconds of runtime.
• Charge for 60 minutes to get 5 minutes
and 45 seconds of runtime.
• Charge for 2 hours for 20 minutes of runtime
(full charge)
NOTE:
1. Do not leave your hand blender uncharged for
an extended period of time, as it will affect the
life of the rechargeable battery.
2. Do not start charging unit after use, wait until
unit is cool.
3. During charging, if all 3 LEDs are flashing, this
indicates that the battery is overheating and
that the unit has entered the battery-
protection mode. Unplug unit and let it cool
before recharging.

ASSEMBLY

BLENDING ATTACHMENT
To align the motor body housing with the
blending shaft, face the hand blender toward
you, and twist the blending shaft onto the
power handle until you hear it click into place.
WHISK ATTACHMENT ASSEMBLY
Align the power handle with the assembled
whisk attachment and twist the pieces together
until you hear and feel them click together.
NOTE: Whisk and gearbox are detachable from
one another.
6