How To Conect Electricity - GE PFMS1FFB Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING!
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
For personal safety, this appliance must be properly grounded.
The power cord of this appliance is equipped with a 3-
prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the
possibility of electric shock hazard from this
appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly
grounded.
Where a standard 2-prong wall outlet is encountered,
it is your personal responsibility and obligation to
have it replaced with a properly grounded 3-prong
wall outlet.
The refrigerator should always be plugged into its
own individual electrical outlet which has a voltage
rating that matches the rating plate.
USING ADAPTERS
Due to potential accidents related to security under certain circumstances, strictly recommend not to use an adapter
plug.
However, if you decide to use an adapter where local codes
permit, it is necessary to make a temporary connection to a
wall outlet to both ends properly grounded using an adapter, it
can be purchased at local shops specialized. The longest edge
of the adapter must be aligned with the long entry contact to
have it in the proper polarity plug connection. When
disconnecting the power adapter, stop always with one hand
while pulling the power cord plug with your other hand. To do
so may cause the adapter to break after some use.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
42
This provides the best performance and also prevents
overloading house wiring circuits which could cause a
fire hazard from overheated wires.
Never unplug your refrigerator by pulling on the
power cord. Always grip plug firmly and pull straight
out from the outlet.
Repair or replace immediately all power cords that
have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either end.
When moving the refrigerator away from the wall, be
careful not to roll over or damage the power cord.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
If you break the ground terminal adapter, DO NOT USE the
appliance until it has been re established the ground properly.
Connecting the adapter ground terminal to the wall outlet does
not contact the device connects to ground, unless the cover
screw is metal and not insulated and the contact wall is
grounded through the house wiring. A qualified electrician
should check the circuit to ensure that the contact is properly
grounded.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido