Refrigerator Compartment - GE PFMS1FFB Manual De Uso Y Cuidado

About the shelves and bins.
Not all features are on all models.
Rearranging the Shelves
Shelves in the refrigerator compartment are adjustable.

Refrigerator Compartment

Some models have wire shelves
that can be adjusted in the same
manner.
To remove:
Remove all items from the shelf.
Tilt the shelf up at the front.
Lift the shelf up at the back and bring the
shelf out.
To replace:
While tilting the shelf up, insert the top
hook at the back of the shelf in a slot on
the track.
Lower the front of the shelf until the
bottom of the shelf locks into place.
Spillproof Shelves
(on some models)
Spillproof shelves have special edges to help prevent spills from dripping to lower shelves. To
remove or replace the shelves, see Rearranging the Shelves.
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you
to reach items stored behind others. The special
edges are designed to help prevent spills from
dripping to lower shelves.
To remove:
Remove all items from shelf.
Slide the shelf out until it stops.
Lift the front edge of the shelf until the
central tabs are above the front bar.
Continue pulling the shelf forward
until it can be removed.
Drop Down Shelf
(on some models)
The drop-down shelf gives you the use of another full-size shelf when you need
extra storage. It conveniently folds back out of the way when not in use, giving you
room for storage of larger items.
To use drop-down shelf:
Pull forward and down to drop the shelf into place.
Pull forward while lifting up to place the shelf out of the way.
(on some models)
To replace:
Place the rear shelf tabs just in front of the
central notches on the shelf frame.
Slide the shelf in until the central tabs are
slightly behind the front bar.
Lower the shelf into place until it is
horizontal and slide the shelf in.
Make sure that the shelf sits flat after
reinstallation and doesn't move freely from side
to side.
Make sure you push the shelves all the way in
before you close the door.
47