Maintenance And Cleaning - Oster GCSTBS6001 Manual De Instrucciones

MAINTENANCE AND CLEANING

Before cleaning the Iron, always make sure that it is disconnected from the electrical wall
socket and is completely cool.
SOLEPLATE
• Residue on the Soleplate can be wiped off with a cloth soaked in a solution of water and
vinegar.
• Do not use scouring pads, abrasives or chemical cleaning solvents as they may
damage the finish.
HOUSING
• The housing can be cleaned with a moist cloth and then wiped dry.
• Other than the recommended cleaning, no further user maintenance should be
necessary. If for any reason your Steam Iron should require repairs, do not try to fix it
yourself. Send it to an Authorized Service Center (please refer to the warranty included
in the box)
1. Turn off the iron and disconnect the plug from the electrical wall socket.
2. Set the Iron in an upright position and let it cool down completely.
3. Set the Steam Select Switch to the closed position
4. Empty out all the water remaining in the Water Reservoir by opening the Water
Reservoir Lid and inverting the Iron over the sink.
5. The Power Cord can be wound around the Heel Rest for easier and tidy storing once
the unit has cooled down. The Iron should always be stored in an upright position.
GCSTBS6001_GCSTBS6002_GCSTBS6005_GCSTBS6051_GCSTBS6052_SEM1 (LA).indd 9
STORING THE IRON
E n g l ish -9
.
5/19/20 6:13 PM