Maintenance And Cleaning - Oster GCSTPM7201 Manual De Instrucciones

When the iron is plugged in, the Power Indicator will light steadily, indicating that there is
power to the iron.
IF YOU LEAVE THE IRON
• In a horizontal position without moving it, or accidentally tip the iron
over, it will automatically stop heating after 30 seconds. The indicator
light will blink repeatedly to let you know that the iron has stopped
heating.
• In a vertical position (on its heel rest) without moving it, the iron will
automatically turn off after 8 minutes. The indicator light will blink
repeatedly to let you know that the iron has stopped heating.
TO RESET THE IRON
• Move the iron back and forth and allow it to reheat for 2 minutes. The indicator will stop
blinking and the iron will start heating again.
WARNING: The 3 Way Auto-Off is a safety feature, not a recommended means for
turning your iron off.
Before cleaning the Iron, always make sure that it is disconnected from the electrical wall
socket and is completely cool.
SOLEPLATE
• Residue on the Soleplate can be wiped off with a cloth soaked in a solution of water and
vinegar.
• Do not use scouring pads, abrasives or chemical cleaning solvents as they may
damage the finish.
HOUSING
• The housing can be cleaned with a moist cloth and then wiped dry.
• Other than the recommended cleaning, no further user maintenance should be
necessary. If for any reason your Steam Iron should require repairs, do not try to fix it
yourself. Send it to an Authorized Service Center.
3 Way Auto-Off Feature

Maintenance and Cleaning

E ng li s h - 9