Mitsubishi Electric MDT42IS Manual Del Usuario página 23

Connecting to a VCR / Stereo Amplifi er
You can connect your VCR / stereo amplifi er to your LCD monitor. Refer to your VCR / stereo amplifi er owner's manual for more
information.
Connect the LCD Monitor to a VCR / Stereo Amplifi er
• To connect the VCR to the VIDEO IN connector (RCA, BNC, or S-VIDEO) on the LCD monitor, use a video cable or S-video
cable.
For connection to the AUDIO IN connector on the LCD monitor, use an RCA cable (audio cable).
Connect the connectors of the RCA cable (audio cable) properly.
When connecting the VCR to the RCA or BNC connector, select "VIDEO" using the INPUT button on the LCD monitor or the
VIDEO button on the remote control.
When connecting the VCR to the S-VIDEO connector, select "VIDEO<S>" using the INPUT button on the LCD monitor or the
VIDEO button on the remote control.
• Before connecting a stereo amplifi er to the LCD monitor, be sure to turn off the stereo amplifi er.
For connection to the AUDIO OUT connector on the LCD monitor, use an RCA cable (audio cable).
Connect the connectors of the RCA cable (audio cable) properly.
Turn on the LCD monitor fi rst, and then turn on the stereo amplifi er.
• The audio input signal selected by the LCD monitor is output from the AUDIO OUT connector.
NOTE:
For video signal input, use either of the RCA or BNC connector.
BNC
RCA
BNC
All manuals and user guides at all-guides.com
LCD monitor
LCD monitor (second monitor)
English-19
VCR
To video output
RCA
To audio output To audio output
L
RCA
RCA
To audio input
L
Stereo amplifier
External
speaker
R
RCA
RCA
To audio input
R