Mitsubishi Electric MDT42IS Manual Del Usuario página 25

Power Indicator
Power ON
Power OFF
Power Standby when
"SCHEDULE" is enable
Power Standby
Diagnosis
(Detecting failure)
Using Power Management
The LCD monitor follows the VESA approved DPM Power
Management function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the display when the keyboard or the mouse has not been
used for a fi xed period.
The power management feature on your new display has
been set to the "ON" mode. This allows your display to enter
a Power Saving Mode when no signal is applied. This could
potentially increase the life and decrease the power
consumption of the display.
Selecting a video source
To view a video source:
Use the input button to set [VIDEO].
Use the COLOR SYSTEM menu to set [AUTO], [NTSC],
[PAL], [SECAM], [PAL60], [4.43NTSC], according to your
video format.
Picture Size
RGB 1, 2, 3, 4, 5, 6
FULL
DVD/HD, VIDEO<S>,
FULL
VIDEO
REAL
Signal Type NORMAL SIZE
4:3
Squeeze
All manuals and user guides at all-guides.com
Status
Green
Red
Red On
Green Blinking
Red, Green
Red Blinking
* See troubleshooting on
page 38.
NORMAL CUSTOM
REAL
NORMAL DYNAMIC
CUSTOM
Recommended Size
NORMAL
DYNAMIC
FULL
English-21
NORMAL: Display the input signal aspect ratio from the PC
signal, or display in 4:3 aspect ratio from the DVD/HD or
VIDEO signal.
FULL: Display in entire screen.
DYNAMIC: Expand 4:3 pictures to the entire screen with
non-linearity. (Some round image will be cut by expansion.)
CUSTOM (ZOOM): Image can be expanded beyond the
active display area. The image which is outside of active dis-
play area is not displayed.
REAL: Image will be displayed 1 by 1 pixel.
ZOOM
Picture Mode
RGB 1, 2, 3, 4, 5, 6 HIGHBRIGHT
DVD/HD, VIDEO<S>, HIGHBRIGHT
VIDEO
Audio Source Switching
You can switch the audio source using the AUDIO INPUT
button.
RGB 1, 2, 6 HDMI AUDIO1
Other than
AUDIO2
AUDIO1
RGB 1, 2, 6
Control Lock Mode
This function disables the operation buttons so that the ad-
justments you make are not changed when they are pressed.
To disable the buttons, press and hold down the
buttons together for at least 3 seconds.
To enable the buttons, press and hold down the
buttons together for at least 3 seconds again.
ZOOM
sRGB
STANDARD
STANDARD CINEMA
AUDIO2 AUDIO3
AUDIO3
and
and