Volvo 32296522 Manual Del Usuario página 19

LOAD CARRIER WITHOUT RAILS
en-GB
• Undo the screw slightly on both sides of
the load carrier's attaching brace.
• Pull the attaching brace out and fold it up.
16
All manuals and user guides at all-guides.com
3
• Position one of the load carrier's feet at the
edge of the roof, so that the pins (1) on the
attaching brace are in line with the rivet
nuts (2) in the door frame.
• Carefully lower the other load carrier foot to
the edge of the roof on the other side.
• Check that the small radius (3) on the
load carrier's foot is in contact around the
equivalent curvature on the top side of the
roof edge.
NOTE
If the load carrier's foot is not in contact
around the equivalent curvature on the
1
top side of the roof edge, it is possible to
undo the screws under the rubber strip and
adjust the foot several millimetres along
the contour.
2