Using The Vacuum; Cleaning With The Vacuum Accessories - Shark NV42 Manual De Instrucciones

Using the Vacuum

OFF
Bare Floors /
Tools
Carpets
4 When cleaning bare floors:
Your Shark Navigator ® Upright
Vacuum is a versatile tool that
Select the "I On" position for
can be used to clean bare floor
suction only cleaning to avoid
surfaces or carpets – with the click
scattering dirt while cleaning.
of a switch.
When cleaning carpets:
Stand the vacuum into the upright
Ensure you have pulled the
position.
handle towards you and select
Plug in the vacuum.
the "II Brush Roll On" position
to agitate the carpet fibers for
1
Start with the Power Switch in
deeper cleaning performance.
the "O Off" position.
5 Due to the huge suction
2
Place your foot on the motorized
power of this vacuum, it
floor brush and pull handle
may become necessary to
towards you.
adjust the suction release
3 Set the Power Switch to desired
on the hose. If the vacuum
cleaning setting.
is difficult to push or pull or
if it is lifting up area rugs,
adjust the suction release by
opening or closing the valve
at the top end of the hose.
6 TOLL FREE: 1-800-798-7398

Cleaning with the Vacuum Accessories

Suction Release
Release suction for
easier push and pull
on high pile carpets
and area rugs.
IMPORTANT:
To protect your carpets, the
Brush Roll will only turn on when
you have pulled the handle back
towards you and released the
Motorized Floor Brush.
IMPORTANT:
Your Brush Roll Indicator Light
Before cleaning with your
will illuminate solid green when
accessories:
brush roll is on, or solid red if
there is a blockage. This feature
Stand vacuum into upright position.
is designed to protect your
Secure Super
Lifetime Belt that powers your
Stretch Hose in
Brush Roll. See Checking for
the anti-tip hose
Blockages on page 11.
hook to prevent
NOTE: The height of your
tipping.
Motorized Floor Brush has been
Select the "I On" position for
optimized for easy pushing and
suction only cleaning.
superior cleaning on all floor
DO NOT pull vacuum cleaner
types, so there is no need to
around by the hose.
make any height adjustments as
you transition to different floor &
DO NOT overextend the hose.
carpet types.
Vacuum Accessories 2 Using the Cleaning Wand:
Your vacuum comes with a Super Stand the vacuum into upright
Stretch Hose and Cleaning Wand. position.
Use one or the other to attach your
Remove the Cleaning Wand
cleaning accessories.
(with hose attached) from the
1 Using the Super Stretch Hose:
unit.
Stand the vacuum into upright Push the selected tool into the
position. end of the Cleaning Wand.
Remove the hose from the 3 Pet Upholstery Tool
Cleaning Wand.
4 Dusting Brush
Push the selected tool into the
5 Crevice Tool
hose connector.
To order additional parts and accessories,
go to www.sharkclean.com or call
1-800-798-7398.
www.sharkclean.com
English
7