Power Source; Switching On/Off - ENERGY SISTEM p7 Manual De Usuario

MAIN MENU
PHOTO.
CALENDAR.
SETTINGS.

POWER SOURCE

≥
Your Energy Photo Frame p7 is powered through the AC/DC 5V adapter
provided with the product. Please firstly connect the photo frame with the
power adapter then connect the power adapter with electrical outlet.
The remote control is powered by a CR2025 3V lithium battery that you
can easily replace when depleted by releasing the battery compartment in
the back of the remote control.
IMPORTANT: In case you will not use the digital frame for a few days, we
recommend unplugging the power electricity adapter from the socket.
SWITCHING ON / OFF
≥
To power on your Energy Photo Frame p7 plug in the provided power
adapter to a 100-240V AC source. Then press MENU/ON/OFF on the
device or ON/OFF on the remote.
To turn it off you can also use ON/OFF on the remote or press and hold
MENU/ON/OFF on the frame. You can also set the auto-power ON and
auto-power OFF from the settings menu.
When you start the frame main menu appears (PHOTO CALENDAR,
SETTINGS). To choose between USB or Memory card, press BACK/EXIT
and select USB or SD/MMC.
25