ENERGY SISTEM p7 Manual De Usuario página 26

IMAGE DISPLAY (PHOTO)
≥
You can use 3 display modes: "Slideshow", "Thumbnail" and "Single". To
choose your preferred mode, go to "Photo setup". You can also change the
mode during image playback, as indicated below.
THUMBNAIL
The digital photo frame shows the miniatures of pictures loaded from the
memory device currently connected to the frame ("Thumbnail" mode).
Press up/down and left/right buttons to select a photo, and press ENTER
to start the Slide Show mode form the selected picture.
SLIDESHOW
By default, the photo frame plays automatically your images in Slide Show
mode when turned on (power ON) or after waiting 15 seconds in the main
menu, no matter what mode you have selected in the "Photo setup" menu.
During the Slide Show, you can go to Thumbnail mode by pressing BACK/
EXIT button. You can also start Slide Show from the currently selected
picture (Thumbnail mode) by pressing ENTER, as indicated above. If you
want to change the display mode between "Slide Show" and "Single", you
only need to press again the ENTER button.
SINGLE
To change the display mode to "Single", you can press again the ENTER
button (during the Slide Show) and you can manually move to the next
pictures, using the left/right buttons. In this display mode, you can rotate
and make zoom on the currently selected photo with the ROTATE and
ZOOM.
Important: Do not leave the same image still for more than one day
26