Malfunction Analysis - INVENTOR COOL-8BS El Manual Del Propietario

Malfunction analy sis
Please check below items before asking for maintenance. If the malfunction still
can't be eliminated, please contact local dealer or quali ed professionals.
Phenomenon
● Power failure
● Is plug loose
●
Air conditioner
ped off or fuse is burnt
can' t operate
● Is there s malfunction for the
circuit
●
after stopping immediately
● Is the power too low
●
Poor cooling
●
(heating)
proper
●
closed
●
seriously (such as static pres
sure, unstable voltage)
●
Air conditioner
within the receiving range
can' t receive
signal from
●
remote contr-
acles
oller or remote
● Is sensitivity of remote contr
controller is
oller low
not sensible.
●
lamp in the room
All manuals and user guides at all-guides.com
Troubleshooting
hether the air switch is trip
hether the unit is restarted up
hether the air lter is too dirty
hether the set temperature is
hether door and window are
hether the unit is interfered
hether remote controller is
hether it s blocked by obst
hether there's uorescence
● ait after power recovery.
● Reinsert the plug.
● Ask professional person to
replace air switch or fuse.
● Ask professional person to
replace circuit.
● ait for 3min, and then turn
on the unit again.
● ait after voltage is resumed.
● Clean the air lter.
● Ad ust the temperature.
● Close door and window.
● Please pull out the plug. Ins
ert the plug after about 3min,
and then turn on the unit.
● The receiving range of remote
controller is m. Do not e ce
ed this range.
● Remove the obstacles.
● Check the batteries of remote
controller. If the power is low,
please replace the batteries.
● ove the remote controller
close to air conditioner.
● Turn off the uorescence lamp
and try it again.
13
Solution