WISEUPSHOP WIFI35 Manual Del Usuario página 3

All manuals and user guides at all-guides.com
4.1.4. Launch the "BVCAM" APP, tap "+", "Add the new online Device", then input the
camera's UID, which is a combination of numbers and letters specific to your camera and
type in the default password "8888". Or you can scan the QR code that sticks on the body
of the power bank camera. At last, click "OK" to add the camera. If the camera shows
online, it means you can view live or record video remotely as long as you have access to
the Internet.
4.2. Option Two: Through "BVCAM" APP
LAN (P2P) Mode Setup
4.2.1. Power on the power bank camera by pressing the Power Button once. It will take up
to 1 minute for the WIFI signal to appear. When the blue indicator light starts flashing and
the red indicator light remains solid, it means the camera's WIFI signal is ready.
4.2.2. Go to the WIFI or WLAN Setting page on your smartphone or tablet PC, locate the
camera's WIFI network SSID named "KD*******", click it to connect your mobile device to
the camera as below:
[Note]:
If the camera's WIFI signal cannot be found after a long time, please recharge the camera
or reset it (See VIII).
4.2.3. Run the "BVCAM" APP.
4.2.4. Add the camera to the "BVCAM" APP as below:
For Android: Tap +> Tap Add the new online Device> Search for the camera > Tap the
camera icon > Tap OK or √.