Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Juno Flex 12
WARNING: For your safety, read and understand instructions completely before starting
installation. Before wiring to power supply, turn off electricity at fuse or circuit breaker box.
SAVE THESE INSTRUCTIONS
1. Read all instructions before beginning installation.
2. Do not conceal or extend trac through
a building wall.
3. Do not install this system in damp or wet locations.
4. To reduce the risk of fire and burns, do not install
this lighting system where the exposed trac
conductors can be shorted or contact any
conductive material.
5. To reduce the risk of fire or overheating, make sure
all connections are tight.
6. Do not install any luminaire closer than 6 inches
(15.25 cm) from any curtain or similar
combustible materials.
7. Turn off electrical power before modifying the
lighting system in any way.
8. For straight 4' trac installations, two supports are
required, spaced a maximum of 36" apart.
9. For straight 8' trac installations, three supports are
required spaced a maximum of 36" apart.
10. Use only with Juno TF32 Flex 12 close-to-ceiling
system components, TF9xx, TF21, TLRSK-xx,
TLR50 Flex 12 and Trac 12 pendant stem feed
components, and TF530 Flex 12 wall mount
system components.
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/juno-trac
©2017 Acuity Brands Lighting, Inc
INSTALLATION INSTRUCTIONS
LED-Compatible Transformers
Rev 3/17
MOUNTING INSTRUCTIONS
Close-to-Ceiling Mount (TF60 CLNG)
1. Remove HOUSING from MOUNTING PLATE assembly.
2. Attach MOUNTING PLATE assembly to JUNCTION BOX (not included)
with JUNCTION BOX SCREWS (not included).
3. Connect TRANSFORMER INPUT LEAD WIRES to 120V electrical
supply wires. Connect white to white and black to black. Connect green
GROUND WIRE in accordance with NEC requirements.
4. Dress wires and replace HOUSING onto MOUNTING PLATE
and secure.
Transformer Input
Lead Wires (2)
P6034
Junction Box
(not included)
Ground Wire
Mounting Plate
Junction Box Screws (2)
(not included)
Housing
Housing Screws (2)
1 of 4

Publicidad

loading

Resumen de contenidos para JUNO FLEX 12

  • Página 1 Junction Box Screws (2) (not included) Housing Housing Screws (2) 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc Rev 3/17 P6034 1 of 4...
  • Página 2: Installation Instructions

    9. Screw TOP CAP onto FEED CYLINDER. (not included) Feed Cylinder Threaded Bushing Fig B Top Cap 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc Rev 3/17 P6034 2 of 4...
  • Página 3 Housing Screws (2) Flex 12 Trac (not included) Electrical Feed Outrigger Trac Screw 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc Rev 3/17 P6034 3 of 4...
  • Página 4 12 to 18 in-lb. 13. Reinstall the cover by placing over terminal block assembly and tightening the cover screw. 1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc Rev 3/17...
  • Página 5: Transformadores Compatibles Con Flex 12 ™ Led De Juno

    Tornillos de Caja de Empalmes (2) (No incluidos) Carcasa Tornillos de Carcasa (2) 1300 S. Wolf Road • Des Plaines, IL 60018 • Teléfono 800-323-5068 • Visítenos en www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc Rev 3/17 P6034 1 de 4...
  • Página 6 Alimentación 9. Enrosque la TAPA SUPERIOR en el CILINDRO DE ALIMENTACIÓN. Figura B Tapa Superior 1300 S. Wolf Road • Des Plaines, IL 60018 • Teléfono 800-323-5068 • Visítenos en www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc Rev 3/17 P6034...
  • Página 7 TRAC proporcionado. Flex 12 Trac (No incluido) Balancín de Alimentación Eléctrica Tornillo Trac 1300 S. Wolf Road • Des Plaines, IL 60018 • Teléfono 800-323-5068 • Visítenos en www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc Rev 3/17 P6034 3 de 4...
  • Página 8: Transformadores Compatibles Con Trac 12/25 Led De Juno

    13. Vuelva a instalar la tapa colocándola sobre el ensamblaje del bloque de terminales y apretando el tornillo de la tapa. 1300 S. Wolf Road • Des Plaines, IL 60018 • Teléfono 800-323-5068 • Visítenos en www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc...
  • Página 9 TF530 Flex 12. (non comprises) Boîtier Vis de boîtier (2) 1300 S. Wolf Road • Des Plaines, IL 60018 • Téléphone 800-323-5068 • Visitez www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc Rev 3/17 P6034 1 sur 4...
  • Página 10 9. Vissez le CAPUCHON SUPÉRIEUR sur le CYLINDRE d’ALIMENTATION. Fig. B Capuchon supérieur 1300 S. Wolf Road • Des Plaines, IL 60018 • Téléphone 800-323-5068 • Visitez www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc Rev 3/17 P6034 2 sur 4...
  • Página 11 ÉLECTRIQUE à l’aide de la VIS DE TRAC fournie. Trac Flex 12 (non compris) Support d’alimentation électrique Vis de Trac 1300 S. Wolf Road • Des Plaines, IL 60018 • Téléphone 800-323-5068 • Visitez www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc Rev 3/17 P6034 3 sur 4...
  • Página 12 13. Réinstallez le couvercle en le plaçant sur l’ensemble du bornier et serrez la vis du couvercle. 1300 S. Wolf Road • Des Plaines, IL 60018 • Téléphone 800-323-5068 • Visitez www.acuitybrands.com/juno-trac ©2017 Acuity Brands Lighting, Inc Rev 3/17...