JUNO FLEX 12 Manual Del Usuario página 3

Juno Flex 12
™
SAVE THESE INSTRUCTIONS
MOUNTING INSTRUCTIONS
Wall Mount (TF60 WALL)
1. Remove HOUSING from MOUNTING PLATE assembly.
2. Attach MOUNTING PLATE assembly to JUNCTION BOX (not
included) with JUNCTION BOX SCREWS (not included).
3. Connect TRANSFORMER INPUT LEAD WIRES to 120V electrical
supply wires. Connect white to white and black to black. Connect
green GROUND WIRE in accordance with NEC requirements.
4. Dress wires and replace HOUSING onto MOUNTING PLATE
and secure.
5. Prepare trac for mounting by drilling a 5/16˝ hole on centerline
of trac. After drilling, ensure that there is no metal burr or shaving
that might short across the trac's two conductive surfaces.
6. Securely mount trac to transformer ELECTRICAL FEED
OUTRIGGER with provided TRAC SCREW.
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/juno-trac
©2017 Acuity Brands Lighting, Inc
INSTALLATION INSTRUCTIONS
LED-Compatible Transformers
Rev 3/17
Transformer Input
Lead Wires (2)
Electrical Feed
P6034
Junction Box
(not included)
Ground Wire
Mounting Plate
Junction Box Screws (2)
(not included)
Outrigger
Housing
Housing Screws (2)
Flex 12 Trac
(not included)
Trac Screw
3 of 4