Operating Instructions; Power Switch - SysTech SY-VB10D Manual Del Usuario

Operating Instructions

Power Switch

1. Start the monitor unit system, press the power switch ON/OFF, when it is started,
the power indicator (green) will light up.
2. Start the camera unit system, press the power switch [ ] , when it is started, the
power indicator (green) will light up.
3. When the monitor unit system is started, the iCore logo screen will appear, then
the system will automatically enter into monitoring status mode, the status bar
as shown in Figure 6 will appear on the display screen.
Volume + /
Night Light
Volume -/
Pairing
Figure 5
Note: The status bar of the monitor unit has been set to [
[ ] . when it is delivered from the factory. If the Channel 1 is not set, please
press [
4. To turn o the monitor unit system, press ON/OFF button, to turn o the camera
unit system, press ON/OFF button for two seconds.
All manuals and user guides at all-guides.com
Power Switch
Power Switch
] at the top of display screen to select Channel 1.
Waiting for Connecting...
Figure 6
7
Status Bar
Sound
Adjustment
OFF] and Channe 1