Volume Control; Dialogue Function; Talk Back Function; Feeding Alert - SysTech SY-VB10D Manual Del Usuario

5. The monitor unit system shall be at least 1m away from the camera unit system,
if the distance is less than 1m or it is too close to the system, it will utter a sound
like "BeBe". (This is a normal situation, because they are placed in di erent rooms
according to system design).

Volume Control

Press [ ] button at the left side of the monitor unit to adjust the sound volume.
Press [ ] to increase the sound volume. Press [ ] to decrease the sound volume.
The display can show the sound volume degree.

Talk back Function

Press and hold the talk back function [
the microphone and release the talk back function button to receive the other one's
response. Adjust the sound volume to an appropriate level.
Press the [ ] [ ] button at the left side of the camera unit system to adjust
the sound volume and receive the dialogue.

Feeding Alert

Press the [ ] button at the top of the monitor unit system, select predetermined
time or press OFF to close it, the system will alert at the predetermined time.
Press any button on the monitor unit system to stop alert. If the button is not
pressed, the feeding alert will repeat for 3 times.

Zoom In /Out

Press and hold the [
the status bar. You can press [

Night Light/Night Vision

Press and hold [
light The night vision function can sense the surrounding environment of the camera
unit and automatically start. The monitoring is available even under full darkness.
All manuals and user guides at all-guides.com
1M
Figure 7
] button at the top of the monitor unit , [
] to set appropriate position for monitoring.
] button on the camera unit for 3 seconds to on or o the night
Waiting for Connecting...
] at the top of the monitor unit speak to
8
] will appear on