Descargar Imprimir esta página

Repair And Maintenance; User Replaceable Accessories And Spare Parts - VWR VisiScope 100POL Serie Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 50

Repair and maintenance

Microscopy environment
This microscope is recommended for use in a clean, dry and shock free environment with a temperature of
0-40°C and a maximum relative humidity of 85 % (non condensing). Use a dehumidifier if needed.
After using the microscope
The microscope should always be kept vertical when moving it so that no moving parts, such as the
eyepieces, fall out. Never mishandle or impose unnecessary force on the microscope.
Never attempt to service the microscope yourself.
After use, turn down the illumination intensity control and turn the light off. Cover the microscope with included
the dust cover, and keep it in a dry and clean place.
Electrical safety precautions
Before plugging in the power supply, make sure that the supplying voltage of your region matches with the
operation voltage of the equipment and that the lamp switch is in off-position.
Users should observe all safety regulations of the region. The equipment has acquired the CE safety label.
However, users do have full responsibility to use this equipment safely.
Cleaning the optics
If the optical parts require cleaning first use compressed air.
If that is not sufficient use a soft lint-free cloth with water and a mild detergent.
And as a final option use the piece of cloth moistened with a 3:7 mixture of ethanol and ether.
Note: ethanol and ether are highly flammable liquids. Do not use them near a heat source, near sparks or
near electric equipment. Use these chemicals in a well ventilated room.
Remember to never wipe the surface of any optical items with your hands. Fingerprints can damage the op-
tics. Do not disassemble objectives or eyepieces in an attempt to clean them.
For the best results, use the VWR cleaning kit (see catalogue number below).
If you need to send the microscope to manufacturer for maintenance, please use the packaging if possible
packaging.

User replaceable accessories and spare parts

DESCRIPTION
H5x eyepiece
WF10x/18mm eyepiece
WF16x/12mm eyepiece
WF10x/18mm micrometric eyepiece
Achromatic objective 4x/0.10
Achromatic objective 10x/0.25
Achromatic objective 20x/0.40
Achromatic objective 40x/0.65
Achromatic objective 60x/0.85
Achromatic objective 100x/1.25 (oil)
Polarising set (filters only)
Dust cover, type 3
Solar battery pack
Attachable mechanical stage
Cleaning kit
All manuals and user guides at all-guides.com
9
QUANTITY
CAT. NO.
2
630-1624
2
630-1625
2
630-1626
1
630-1627
1
630-1628
1
630-1629
1
630-1630
1
630-1631
1
630-1632
1
630-1633
1
630-1635
1
630-1636
1
630-1637
1
630-1634
1
630-1803

Publicidad

loading

Este manual también es adecuado para:

Visiscope ml103 polVisiscope bl103 pol630-1555630-1802