Special Product Features; Battery Pack - Metabo BS 14.4 Li Manual Original

17026947_0209 BS 18 Li BS 14_4 Li BS Li Partner Edition.book Seite 10 Dienstag, 17. Februar 2009 10:33 10
ENG ENGLISH
mate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
Secure the workpiece against slipping, e.g. with
the help of clamping devices.
LED (9): Do not view LEDs directly through optical
instruments, LED class 1M, classified as per DIN
EN 60825-1: 2003, wavelength: 400-700 nm; 300
µs.
5 Overview
See page 3 (please unfold).
1 Keyless chuck
2 Selector barrel (torque, drilling)
3 Switch (1st/2nd gear)
4 Rotation selector switch (rotation setting,
transport lock) - both sides of the machine
5 Battery pack release button
6 Capacity indicator button
7 Capacity and signal indicator

8 Battery pack

9 LED lights
10 Trigger

6 Special Product Features

• Electronic single-cell monitor that extends the
service life of the battery pack.
• Electronic overload protector with integral
temperature monitor protects the machine and
the battery pack.
7 Use
7.1 Automatic protection mode
If the machine switches off automatically, the
machine electronics have activated auto-
matic protection mode. A warning signal sounds
(continuous beeping). The beeping stops after a
maximum of 30 seconds or when the trigger (10) is
released.
Causes and remedies:
1. Battery pack almost flat (the electronics
10
All manuals and user guides at all-guides.com
2. Long continuous overloading of the machine
3. If the current is too high (for example, if the
7.2
Charge the battery pack before use (8).
If performance diminishes, recharge the
battery pack.
"Li-Power" li-ion battery packs have a
capacity and signal indicator: (7)
- Press the (6) button, the LEDs indicate the
- If one LED is flashing, the battery pack is almost
7.3
Removal:
Press the battery pack release (5) button and pull
the battery pack (8) forwards.
Inserting:
Slide in the battery pack (8) until it engages.
7.4
Set the rotation selector switch (4).
See page 3 (please unfold).
R = Clockwise setting
L = Counter-clockwise setting
0 = Central position: transport lock setting
prevent the battery pack from discharging
totally and avoid irreparable damage).
If one LED is flashing (7), the battery pack is
almost flat. If necessary, press the (6) button
and check the LEDs (7) to see the charge level.
If the battery pack is almost flat, it must be
recharged.
will activate the temperature cut-out.
Leave the machine or battery pack to cool.
Note: If the battery pack feels very warm, the
pack will cool more quickly in your "AIR
COOLED" charger.
Note: The machine will cool more quickly if you
operate it at idling speed.
machine seizes continuously for long periods),
the machine switches off.
Switch off the machine by releasing the trigger
(10). Then continue working as normal. Try to
prevent the machine from seizing.
Battery pack
charge level.
flat and must be recharged.
Removing and inserting the battery
pack
Setting the direction of rotation, engag-
ing the transporting safety device
(switch-on lock)
(switch-on lock)