Environmental Protection; Technical Specifications - Metabo BS 14.4 Li Manual Original

17026947_0209 BS 18 Li BS 14_4 Li BS Li Partner Edition.book Seite 12 Dienstag, 17. Februar 2009 10:33 10
ENG ENGLISH
10 Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault with the
power tool.

11 Environmental Protection

Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact
with water!
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately
and handed in for environmentally compatible
recycling.

12 Technical Specifications

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
U = Voltage of battery pack
n = No-load speed
0
Tightening torque for screwing:
M = Soft screwing application (wood)
1
M = Hard screwing application (metal)
3
M = Adjustable torque
4
Max. drill diameter:
D = in steel
1 max
D = in softwood
2 max
m = Weight (with smallest battery pack)
G = Spindle thread
D = Chuck clamping range
max
12
All manuals and user guides at all-guides.com
Vibration total value (vector sum of three
directions) determined in accordance with
EN 60745:
a
a
K
The vibration level specified in these instructions
has been measured using a procedure standard-
ised in EN 60745 and can be used for comparing
power tools with one another. It is also suitable for
a provisional estimate of the vibratory load.
The specified vibration level applies to the main
applications of the power tool. However if the tool
is used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This can considerably
increase the vibratory load over the entire working
period.
For an accurate estimate of the vibratory load,
times in which the machine is switched off, or
when it is running but not actually in use, should
also be taken into consideration. This can consid-
erably reduce the vibratory load over the entire
working period.
Define additional safety measures to protect the
operator against the effect of vibrations, e.g.:
maintenance of power tools and tools, keeping
hands warm, organisation of work sequences.
Typical A-effective perceived sound levels:
LpA
L
K
During operation the noise level can exceed
85 dB(A).
Measured values determined in conformity with
EN 60745.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
= Vibration emission value (drilling into
h, D
metal)
= Vibration emission level (screwing
h, S
without impact)
= Uncertainty (vibration)
h, ...
= Sound pressure level
= Acoustic power level
WA
, K = Uncertainty (noise level)
pA WA
Wear ear protectors!