Change The Li-Ion Battery - B.Braun Aesculap Econom CL Instrucciones De Manejo/Descripción Técnica

Aesculap
Battery-operated clipping machine Econom CL sheep shearing
Loss of capacity/performance due to prolonged
storage of the discharged Li-ion battery!
►
CAUTION Store Li-ion batteries only in fully charged con-
dition and recharge stored batteries once every
month.
Destruction of the product, charging bay or Li-ion
battery when inserting the wrong type of battery in
the charging bay!
CAUTION
►
Insert Li-ion battery only in the appropriate
charging bay.
Note
The charger can be used by children if 8 years or older, as well as by persons
with reduced physical, sensory or mental capacities or with lack of experi-
ence and knowledge, if these persons are supervised or have been
instructed on how to use the device safely, and if they understand the risks
associated with the use of the device.
►
Do not allow children to play with the device.
►
Do not allow children to clean or maintain the device without supervi-
sion.
Note
The Li-ion battery heats up slightly during charging.
Note
Disconnect the mains power cord at the mains socket when the charger is
not going to be used.
►
Only use the Aesculap GT803 charger for charging the Li-ion batteries.
►
Charger 39: plug the device plug of the mains power cord into the
charger.
►
Plug in the mains plug of mains power cord at the mains power socket.
►
Plug the lithium iron battery 38 into the charging bay of the charger
and charge it, see Fig. E.
The LEDs in the charge status display f of the Li-ion battery blink in
accordance with the current charge status. When all the LEDs are per-
manently illuminated, the battery is completely charged.
6
Econom CL Schafschur
®
4.4

Change the Li-ion battery

►
Hold the battery-operated clipping machine i with the cutter head
downwards so that the Li-ion battery 38 does not fall down when
loosened, see Fig. 1.
►
Loosen the battery lock h with your thumb.
38
Fig. 1
h
i