Tool Components; Technical Details; Warning Symbols; Installation - CAMPAGNOLA C2 Manual De Uso Y Mantenimiento

3 - SPECIFICATIONS

3.5 Tool components

• Ergonomic handle (7).
• Pneumatic motor (5).
• Gear box (6).
• Double-edged blade (2).
• Safety hand guard (3).
• Supporting handle (4).

3.6 Technical details

• Weight (without extension pole): .................................................. 3800 kg
• Max. air consumption: ............................................................. 400 Nl/min
• Working air pressure: ................................................... 1000 kPa (10 bar)

3.7 Warning symbols

General warning
Duty of reading the
use & maintenance manual
Compulsory adequate clothing
4

- INSTALLATION

4.1 Assembling onto fixed (19) or telescopic extension pole (18)
• Loose the locking ring nut (11), unscrew and remove the handle (7).
• Screw the tool onto the extension pole connection (9) and tighten it. For removing it, follow the same procedure in reverse order.

4.2 Connection to the air supply

• Make sure the safety catch (12) in the handle (7) is inserted.
• Set the air pressure at kPa 1000 (10 bar).
• Fit the air hose into the quick air plug (10). Verify that the air plug is free from dirt and that its inner dia. is at least 8 mm.
WARNING!
For a suitable performance, the air hose connecting the tool must be straight and have a 8 mm inner diameter and a
maximum length of 50 m.

4.3 Checks before the use

• Check the handle (7) for tightness.
• Check the safety catch (12) in the trigger (13) for perfect working.
• When assembling the tool onto a telescopic extension pole (18), check the clamp (17) for tightness.
18 - 52
Compulsory feet protection
Compulsory head protection
Compulsory hands protection