Sharkoon SHP BRONZE Manual Del Usuario página 4

REMOVAL OF EXISTING POWER SUPPLY FROM PC CASE
1. First shut down your PC. Then disconnect the power cord from the wall outlet and the power supply (PSU).
2. Now open the PC case (for additional information, refer to the manual of your PC case).
3. Disconnect all cables between the power supply and the other PC components (e.g. mainboard, drives, fans, etc.).
4. Remove the mounting screws connecting the power supply to the PC case and then carefully remove the
power supply from the case.
INSTALLING THE POWER SUPPLY INTO A PC CASE
1. Insert the power supply into the PC case and place it against the power supply mount on the rear panel.
For additional information, see the manual for your PC case.
2. Attach the power supply from the outside of the case using the provided screws. Ensure that the fan and air vents
of the installed power supply are not covered.
3. Use the supplied cables to connect the power supply to the components. The connectors are coded to avoid
connecting incorrectly.
SAFETY STANDARDS AND
PROTECTIONS
Over Voltage Protection (OVP)
Under Voltage Protection (UVP)
Short Circuit Protection (SCP)
Over Power Protection (OPP)
CERTIFICATIONS