PERMANENT CONNECTION
PERMANENT CONNECTION
In the instance that you would need to connect your
generator to a large Propane Supply tank, larger than the
typical 20 or 30 lb DOT cylinder, it is recommended to
contact your Gas Equipment Company. Various equipment for
use with LP-Gas, is required for proper conformance to all
NFPA regulations. Your Gas Equipment Company can help
you select and install the proper regulator, fittings and
connections to meet all the Codes and manufacturer
regulations. Each installation may be different and will
required proper equipment. Contact your Gas Equipment
Company to assure that you are meeting all NFPA 58 and 54
Codes.
NFPA 58: Liquefied Petroleum Gas Code.
NFPA 54: National Fuel Gas Code.
English
TYPICAL CONNECTION DIAGRAM
TYPICAL CONNECTION DIAGRAM
IMPORTANT INFORMATION: Product must be
installed and used in strict conformance with NFPA
Pamphlet 58 and/or NFPA Pamphlet 54 and all other
codes, regulations and manufacturer
recommendations. Failure to follow these codes,
regulations and recommendations could result in
hazardous installation, bodily injury and/or death.
Contact your Gas Equipment Company or a
customer service representative for more
information.
LP Gas is extremely flammable and
explosive. Devices used for handling LP
Gas must be installed and used in strict
conformance with NFPA Pamphlet 58 and
54 and all other codes, regulations and
manufacturer recommendations.
18
Customer Hotline 1-800-445-1805