Troubleshooting Tips; Environmental Instructions - Würth 0772 121 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 20
Fault
Reverse connection LED [2] shows red.
Charge indicator LED [1] illuminated red.
No output voltage at jack at rear side of the
casing.
Jump start procedure not possible.
Maintenance and cleaning
Attention!
Clean the device only when the mains
plug has been removed.

Environmental instructions

Do not throw the device away with
normal domestic waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally compatible manner.
Batteries:
Do not dispose of batteries with domestic waste,
do not expose to fire or water. Collect and recy-
cle batteries or dispose of with due care for the
environment.
10

Troubleshooting Tips

Cause
– Booster cable clamps are connected incorrectly.
– Charge level of device battery too low.
– Charging not possible.
– Charge level of device battery too low.
– Charge level of device battery too low.
– Device internal fuse is defective.
The following guarantees apply for this Würth
device:
– Battery booster kit and charger: 24 months
– Battery in battery booster kit: 12 months
– Cable clamps and fuses are excluded as they are
wear parts.
The warranty period starts with the date of purchase
(verified by invoice or delivery document).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop. Sub-
ject to technical changes without prior notice.
We accept no liability for printing errors.
If. in spite of careful manufacturing and testing
processes, the device becomes faulty, a repair by
Würth masterService should be arranged. With
any enquiries or spare parts orders, always quote
the article number as given on the device type plate.
Warranty
Accessories and spare parts

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

0772 122

Tabla de contenido