Kathrein UFO 372/TP Manual Del Usuario página 18

The setting can also be made on a digit-by-digit basis:
• Press the "Change setting mode" button
• The fi rst digit fl ashes and can be input directly using the buttons on the keyboard
• After the fi rst digit has been input, the second fl ashes, and so on
• To make a correction, press the "Back" button to skip one place to the left
• After the last digit has been set, press the "Change setting mode" button
The current SNR and the automatically detected operating mode, DVB-S or DVB-S2 of the front end are displayed in the input
frequency sub-menu.
Pressing the "Sub-menu" button
I 1236 MHz
27.500 MS/s
Outp. S21
6.900 MS/s
Main menu
The displays of SNR and DVB operating modes are valid only in regular operation with the front end clicked into place.
Note: For the SNR display, all parameters must be set and the indicator (*) must not be fl ashing.
Trouble-free operation of the systems requires: SNR > 12 dB
1.5 Selecting the input symbol rate
I 1236 MHz
27.500 MS/s
Outp. S21
6.900 MS/s
Main menu
The input symbol rate is selected using the "<" and ">" buttons.
The input symbol rate can be adjusted continuously from 2.0 MS/s to 45 MS/s (DVB-S) or 2.0 MS/s to 30 MS/s (DVB-S2) in
0.1 MS/s steps using the "+" and "-" buttons.
The digits can also be entered individually to a resolution of 0.001 MS/s:
• Press the "Change setting mode" button
• The fi rst digit fl ashes and can be input directly using the buttons on the keyboard
• After the fi rst digit has been input, the second fl ashes, and so on
• To make a correction, press the "Back" button to skip one place to the left
• After the last digit has been set, press the "Change setting mode" button
Note: The code rate (e.g. 3/4) is automatically determined once the channel unit has locked on to the set transponder.
If an exclamation mark "!" is displayed for the output symbol rate, the output symbol rate or QAM stage must be
changed to ensure proper operation of the unit.
1.6 Selecting output channel or output frequency
The output channel unit is selected using the "<" and ">" buttons. You can use the "+" and "-" buttons to adjust the channel
from 48 to 62.25 MHz and 114 to 858 MHz in 7 or 8 MHz increments.
Inp. 1568 MHz
27.500 MS/s
Outp.
S21
6.900 MS/s
Main menu
Fine adjustments can be made to the output frequency in the output channel sub-menu in 250-kHz steps.
Pressing the "Sub-menu" button
All manuals and user guides at all-guides.com
(starts mode)
activates the sub-menu; pressing the "Sub-menu" button again deactivates it.
TP
3/4 QPSK
306.00 MHz
256 QAM
3/4 QPSK
306.00 MHz
256 QAM
(starts mode)
3/4 TP
306.00 MHz
256 QAM
activates the sub-menu; pressing the "Sub-menu" button again deactivates it.
to end the mode
** UFO 372TP-I
SNR
--.-dB
Standard DVB-S
Sub-menu for "Input frequency" (no signal)
I 1236 MHz
27.400 MS/s
Outp. S21
6.900 MS/s
Main menu (example for digit-by-digit setting)
to end the mode
** UFO 372TP-I
Frequency 306.25
Level 0
Output on
"Output frequency" sub-menu
**
3/4 QPSK
306.00 MHz
256 QAM
**
MHz