Kathrein UFO 372/TP Manual Del Usuario página 23

2 Settings at system level
Note: The use of the controller bus demultiplexer UFX 314 (BN 20610071) is an essential requirement for
making the following settings.
The central controller is selected by pressing the double arrow buttons "<<" and ">>". The procedure is exactly the same as for
the channel units; when selected the controller has the same priority as a channel unit. When the central controller is selected,
its LED lights up yellow.
2.1 Setting the language and interrogating the version numbers
Pressing the "F" button brings you to the system menu, where the language can be set and the version numbers interrogated,
the system password set and the cable NIT settings made.
**** System
Set language
Selection with +/-
Main menu
The instructions for this can be found at the start of the setup instructions, since these menus are accessible at and
relevant to the channel unit level.
2.2 Setting the system password
Use the "+" and "-" buttons to select the "System password" menu item and press the "Sub-menu" button to call it up.
The fi rst digit of the PIN fl ashes and can be input directly using the buttons on the keyboard. Then the next digit fl ashes, and so
on. Correction can be made by pressing the "Back" button.
Exit the "System password" menu by pressing the "Change setting mode" button
**** System
System password
Selection with +/-
Main menu
2.3 Settings for generating the cable NIT
Pressing the "F" button brings you to the system menu, where the cable NIT settings can be made. Press the "+" and "-" "Cable
NIT" buttons in the system menu.
Pressing the "Sub-menu" button
**** System
Cable NIT
Selection with +/-
System menu
Press the "<" and ">" buttons to select the desired parameter "off/on", "Generate", "Name" or "ID".
Press the "Sub-menu" button to activate the selected parameter and open the respective sub-menu.
All manuals and user guides at all-guides.com
Sample text
****
****
activates the sub-menu; pressing the "Sub-menu" button again deactivates it.
****
**** Language
English
"Set language" sub-menu
.
PIN:
"System password" sub-menu
**** Cable NIT
NIT: off
Network: Name
"Cable NIT" sub-menu
****
0000
****
Generate
ID