Service Data; Installation - Zanussi ZOB22601 Manual De Instrucciones

Problem
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle
on the food and in the cavity of
the oven.

Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

WARNING!
Refer to Safety chapters.
www.zanussi.com
All manuals and user guides at all-guides.com
Possible cause
The Minute Minder + End of
Cooking programmer is not set.
The fuse is released.
The lamp is defective.
You left the dish in the oven for
too long.
We recommend that you write the data here:
Set the Minute Minder + End of
Cooking programmer. Refer to
the chapter "Clock functions".
Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
Replace the lamp.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
15