Service Data - Zanussi ZOB10401WK Manual De Instrucciones

Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
It takes too long to cook the
dishes or they cook too quick-
ly.
Steam and condensation settle
on the food and in the cavity of
the oven.
The display shows an error
code that is not in this table.

SERVICE DATA

If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
16
Possible cause
The clock is not set.
The necessary settings are not
set.
The automatic switch-off is ac-
tivated.
The Child Lock is on.
The fuse is blown.
The lamp is defective.
The temperature is too low or
too high.
You left the dish in the oven for
too long.
There is an electrical fault.
We recommend that you write the data here:
Set the clock.
Make sure that the settings are
correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Replace the lamp.
Adjust the temperature if nec-
essary. Follow the advice in the
user manual.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
•
•
the appliance cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
Deactivate the oven with
the house fuse or the safety
switch in the fuse box and
activate it again.
If the display shows the er-
ror code again, contact the
Customer Care Depart-
ment.