Enjoying The Sound By Using Headphones; Preventing Transmission To Neighbors (Pairing) - Sony S-master WAHT-SBP1 Manual De Instrucciones

Enjoying the sound by
using headphones
You can enjoy the system's sound in a place
away from the S-AIR main unit by
connecting the headphones to the PHONES
jack on the surround amplifier.
Note
• When you connect headphones to the surround
amplifier, none of the speakers output sound.
• The volume of the S-AIR main unit is minimized
if you turn off the surround amplifier with
headphones connected, or radio reception is
poor. In either case, check radio reception, and
set the volume again.
Preventing transmission
to neighbors (Pairing)
If your neighbors also have S-AIR products
and their IDs are the same as yours, your
neighbors could receive the sound of your
S-AIR main unit. To prevent this, you can
identify your S-AIR products by performing
the pairing operation.
x Before the pairing operation
(example)
The sound transmission is established by the
ID.
Your room
S-AIR main unit
ID A
ID A
Surround
amplifier
10
GB
Neighbor
ID A
S-AIR receiver
x After the pairing operation
(example)
Sound transmission is established between
the surround amplifier and the S-AIR main
unit that performed the pairing operation.
Your room
S-AIR main unit
ID A
ID A
Surround
amplifier
Pairing
1
Turn on the S-AIR main unit and
the surround amplifier.
The system turns on.
2
Match the IDs of the S-AIR main
unit and the surround amplifier.
3
Set up the S-AIR main unit so it is
ready for pairing.
For details, refer to the operating
instructions of the S-AIR main unit.
The POWER / ON LINE indicator on
the surround amplifier flashes green.
4
Press PAIRING on the rear panel
of the surround amplifier.
The PAIRING indicator flashes red
when pairing starts.
When sound transmission is
established, the POWER / ON LINE
indicator turns green and the PAIRING
indicator turns on.
If you use more than one surround
amplifier, perform Steps 3 and 4 for
those also.
Neighbor
No transmission
ID A
S-AIR receiver