Korona 81100 Manual De Instrucciones página 17

BEFORE FIRST USE
• Remove all packaging material and check whether the appliance is complete and that all
accessories are included.
• Fully unwind the power cord.
• Clean the appliance as described under Cleaning and Care.
If any items are damaged or missing, contact your dealer or customer service.
Warning: Plastic bags are a danger to toddlers and babies, therefore keep them away
to avoid suffocation.
ASSEMBLY
Always ensure that the fan is unplugged from the power supply and turned off
before commencing with the assembly process.
1. Place the cross base (12) with end cap on dry, flat surface
2. Release the adjustable pole inner tube (8) by loosening the height adjustment ring (9).
3. Attach the adjustable pole (8,9,10) to the cross base (12) by 4 screws. Insert the base cover
(10) to cover
4. Attach the control panel (13) to the adjustable pole inner tube (8) by tightening the ring (9)
5. unscrew the rear grill fastener (4) by rotating it anticlockwise
6. Position the rear grill (5) against the front of the motor with its handle at the top, ensuring
that the locating peds on the motor are correctly inserted into the hole on the grill
7. Screw the grill fastener (4) onto the projecting thread on the motor front cover by rotating it
clockwise until it is firmly tightened.
8. Push the fan blade (3) onto the motor shaft. Then firmly screw on the blade fastener (2).
9. Attach the logo plate to the front grill by 3 screw (1). Then position the front grill against the
read grill (5) and join them together.
Note: Always attach the safety screw (14) to ensure that the grill is properly assembled!
Always make sure that the fan is properly assembled and unplugged before
operation, changing the tilting angle and changing the direction of the air current
(oscillation).
OPERATION
1. Place your fan on an even, dry and stable surface.
2. Ensure the fan is set to 0 (OFF) before plugging it into a a power socket.
Make sure your local voltage matches the technical data of the appliance. Otherwise the
appliance may overheat and get damaged.
4. Switch on the appliance by pressing ON/OFF button on the unit or remote control.
5. Press mode button to switch between normal, natural wind, sleep mode.
Note: corresponding indicator will light up.
6. Press speed button to switch the fan speed between L / M / H.
Note: corresponding indicator will light up.
7. Press timer button continuously to preset auto switch off timer.
Indicator light up according to the desire timercount down timer up to 7.5hrs with indicator
light on the control panel.
Instruction Manual
ENGLISH
17