Maintenance - TCL Sweeva 6000 Guia De Inicio Rapido

Maintenance

Note: Turn off the robot by pressing the power button for 3 seconds/remove the charging
base from power before cleaning.
1. Cleaning the Dustbin
Open the dustbin by pulling open the dustbin door on the debris intake side and
dispose of contents. (Note: the door will swing downwards). You can remove the
filter to wash the dustbin with plain water.
2. Cleaning the Filter
While the filter is removed, use the included tool brush to gently dust off any
loose dust. You can also rinse the filter for 1 minute and shake off excess water.
Reinstall filter once completely dry (up to 24 hours or more may be required).
(Monthly cleaning is recommended, but no more than one time per month).
3. Replacing the Dust Bag (Self-Emptying Dustbins Only)
Open the top cover, pull up the handle of the dust bag and discard in the trash.
Next, install a new dust bag and close the top cover.
Note: If the dust bag is not in place or not installed correctly, a red light on the
dustbin will appear.